Service I
Anti-Slip Floor Treatment
Professionally increase the coefficient of friction on polished floors without compromising their visual appearance.
What We Do
Professional Anti-Slip Treatment
Invisible Safety for Luxury Surfaces
Slip-and-fall accidents are one of the most common liabilities in luxury hospitality. Polished marble, granite, porcelain stoneware and natural stone floors deliver stunning aesthetics but can become dangerously slippery when wet, especially in lobbies, pool surrounds, bathrooms, spa areas, restaurant entrances and outdoor terraces.
GFS anti-slip treatment works by creating a controlled micro-texture on the surface of the stone or tile. The treatment chemically etches microscopic channels into the top layer of the material, increasing the coefficient of friction (COF) by 30–60% depending on the substrate. The result is a surface that meets or exceeds the requirements of DIN 51130 (ramp test, R9–R13 classification), BS 7976 (pendulum test, 36+ PTV) and ANSI A326.3 (DCOF ≥ 0.42).
Unlike adhesive anti-slip strips or coatings that alter the look of a floor, our chemical treatment is completely invisible. The surface retains its original colour, veining, gloss level and texture. Guests and staff will feel the improved grip underfoot, but will not see any change to the floor.
The treatment is applied in a single session, typically overnight to avoid disrupting hotel operations. The floor is cleaned, treated with our proprietary acid-based solution (calibrated to the specific stone type), neutralized, rinsed and dried. The entire process takes 4–8 hours for a standard lobby area. No downtime is required: the floor can be walked on immediately after treatment.
Longevity depends on foot traffic, but in a typical luxury hotel environment the treatment lasts 3–5 years before a refresh is needed. Maintenance is straightforward: standard neutral pH floor cleaners are recommended, and no special products are required.
FAQ
Frequently Asked Questions
Will the treatment change the appearance of my floor?
No. Our anti-slip treatment is completely invisible. The chemical micro-texturing occurs at a microscopic level that is imperceptible to the eye. The floor retains its original colour, gloss, veining and overall aesthetic. This is a critical advantage for luxury environments where design integrity cannot be compromised.
How long does the treatment last?
In a typical luxury hotel environment with high foot traffic, the treatment lasts 3 to 5 years. In lower-traffic residential settings, it can last even longer. We offer periodic COF testing and maintenance refreshes to ensure continuous compliance.
Can the treatment be applied while the hotel is operational?
Yes. We typically work overnight or during low-occupancy periods. The treatment requires no curing time: the floor can be walked on immediately after completion. We section off areas progressively to minimize disruption to guests and staff.
Does the treatment affect cleaning procedures?
No. The treated surface can be cleaned with the same products and methods used before treatment. We recommend neutral pH cleaners (pH 7–9) and standard mopping techniques. Harsh acidic or highly alkaline cleaners should be avoided, as they can reduce the treatment’s effectiveness over time.
What standards does the treatment comply with?
Our treatment is designed to meet or exceed DIN 51130 (ramp test, R9–R13 classification), BS 7976 (pendulum test, achieving PTV values of 36 and above), and ANSI A326.3 (DCOF ≥ 0.42). We provide before-and-after test certificates upon request.